Size & Fit Guide
Measure twice, order once. Grab a tape measure (inches) and check what applies to you:
- Cabinet door racks & organizers: the flat area on the inside of the door (framed doors have a raised edge), and the gap between the closed door and the front of the shelves. The rack plus what's on it must fit in that gap.
- Drawer dividers (cut-to-fit): inside length, width and height of the drawer. You cut the strips to length, and a cut strip can't be joined back, so measure twice before cutting.
- Faucet sponge holder: fits round faucets 0.6-1.0 in (15-25 mm) in diameter only, not square or flat faucets. Wrap a strip of paper around the faucet, measure it and divide by 3.14. Doesn't fit? It can also mount on a smooth wall.
- Sink-corner drying rack: the rack is 16 in along the bottom edge, 9 in on the side and 3.15 in across the top. Measure your sink corner first.
- Over-the-door towel bar: about 9.25 in long and hooks over the edge of the cabinet door. Check that your door's top edge is free and not blocked by the cabinet frame.
- Wrap & bag roll holders: each holder is about 2.75 x 2.55 x 1.57 in; you use a pair per roll.
- Under-shelf drawer (Spice & Pantry Door Kit): a smooth, flat underside of the shelf (wire shelves won't work) and the clearance below it.
Compare with the dimensions on each product page. Still unsure? Send us a photo and your measurements through our Contact page and we'll help you choose.
